Coagulation and Flocculation Specifications

Dissolved and suspended particles are present in most industrial wastewater. To remove these particles from the water, Coagulation and Flocculation processes can be used. Coagulation-Flocculation is a chemical water treatment process often applied prior to sedimentation and filtration. Enviro Concepts provides proven Pre-Coagulation and Pre-Flocculation auxillary equipment for a wide range of water and wastewater treatment applications.


Enviro Concepts Chemical Mixing and Dosing equipment is used prior to solid-liquid separation processes in our waste water treatment plants
like the Dissolved Air Flotation (DAF) or the Lamella Clarifier. Some of the applications where coagulation and flocculation systems are used:

  • Potable Water Pre-Treatment
  • Vehicle and Equipment Wash
  • Commercial Trade Waste
  • Industrial Waste Water
  • Council Waste Water
  • Bore water and Sea water Clarification

Static Mixers
(Clear PVC Static Mixer – 1.5 to 230 LPM)

Enviro Concepts’ clear PVC static mixers are designed for quick blending and integration of coagulants and flocculants into the wastewater
by imparting turbulance. This is done over a short pipe distance using 6 to 12 mixing elements which also allows for visual inspection of the mixing process.
  • PVC clear pipe
  • 6 or 12 mixing elements
  • Edge sealing and Male NPT threads
MaterialClear PVC
Mixing Element6 or 12 element
ConnectionMale NPT thread
Pipe DiameterFrom 10 to 50 mm
Mixer LengthFrom 165 to 889 mm
WeightFrom 36 to 1,219 grams
Max Working PressureUp to 2,140 kPa
Typical Flow1.5 to 230 LPM (0.09 to 14m³
Pressure Loss1.7to 169.0 kPa


Pipe Flocculators
(Flocculation Pipe Mixers)

Enviro Concepts pipe flocculators are hydraulic flocculators that use the natural turbulence generated by the water flow to mix the wastewater
with the injected coagulants and flocculants.
  • Chemical injection and sampling ports
  • Clear PVC section for visual inspection
MaterialPVC or Stainless Steel
Flow CapacityFrom 1.0 to 200 m³/hr
Inlet/Outlet ConnectionsFrom 25 to 250mm
Approx. LengthFrom 2000 to 5500 mm
Approx. WidthFrom 370 to 1400 mm
Approx. HeightFrom 800 to 1700 mm
OptionsChemical dosing ports
FramesCoated/Galvanised Carbon Steel

Portable and Top-Entry Mixers
(Slow Speed, Portable Clamp Mount and Slow Speed, Fixed Top Mount)

Enviro Concepts’ portable and fixed top entry motorised mixers are engineered for efficient low shear liquid blending. Our mixers use high
quality motors.
  • Portable clamp mounted or fixed
  • Ground gears in helical unit design
  • Stainless steel shafts, couplings and impellers
Motor415V, 3-Phase, IP55
Impeller and ShaftSS316,other grades available
Power0.25 to 2.20 kW (0.7-4.9A)
Speed325-353 rpm

For larger mixers contact Enviro Concepts to discuss your requirements in detail.

To download the specification sheet, visit this page.

For a FREE ESTIMATE, contact us now!